Hey, no offense, however your Swim Spa Cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at one time or another; water is among nature’s most erosive compounds. Moisture permeates in and ends up being trapped between the outer vinyl shell and the cling wrap foam cores. The warm, wet environment is perfect for mold and mildew and other kinds of smelly things.
If moisture has actually penetrated even more into the plastic wrapped foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and foul-smelling slime, however likewise make the cover actually difficult to eliminate, and not as reliable at keeping the heat in the spa. Time for a better type of Swim Spa Cover
Smelly Swim Spa Cover?!?
• Broken or damaged. Split foam cores, ripped or worn spots, torn seams. A Swim Spa Cover that loses it’s arched roof line, to keep water draining off correctly, will ultimately begin to puddle water, which is probably time to purchase a new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is also problem, and although you can fend off the inescapable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can endure longer durations, but it’s an excellent habit to remove the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow moisture to get away do so, but don’t get rid of vulnerable foam panels unless absolutely necessary.
Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a Swim Spa Cover with tape and staples, but it won’t stop moisture effectively. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded joint are not going to keep the extreme moisture from your spa from reaching the foam core. The only genuine service is a Swim Spa Cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not kept regularly with sanitizer and filtering, or is not surprised often enough, bacteria and algae can take advantage of a hospitable environment to flourish. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your Swim Spa Cover cover. Since the cover is so near the spa, it soaks up the chemistry of the spa. Clean, clear and sanitary water is the best environment to prevent stinky spa covers. (Sorry however this is just BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roof, that can be worse than no roofing at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times per year, so that it always looks fantastic, and is secured from the elements. Again, this actually isn’t really going to stop the mold and mildew from growing inside a foam cover But it will help your spa dealer pay their costs. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.
Repair Your Swim Spa Cover!
• Remove to Safe Location: This primary step might appear obvious, however you require an excellent location to permit the cover to sit undisturbed from animals, wild animals, and winds. It must be a warm location if possible, or a dry indoor place with low humidity can likewise be used.
• Deodorize & Disinfect: You might not need to do both, it’s best to be as mild as possible. Don’t use home cleaning products on your Swim Spa Cover, strange chemicals can end up in your spa water. Carefully clean all outside surface areas with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this must be avoided if possible, due to the fact that the panels could become harmed throughout removal or cleaning. However if you figure out that there is something slimy within, you can normally unzip and remove the panel for a cleansing inside and out.
How frequently does your spa dealer anticipate you to do all this? If your swim spa is safeguarded from the majority of sun and rain, two times annually. If it’s out in the open it should be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.
The most convenient remedy for a foul-smelling Swim Spa Cover is to just purchase a different kind of Swim Spa Cover A stinky swim spa cover just means that your cover is taking on wetness, and things are starting to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam however has sealed air chambers rather will avoid offering the mold and mildew a location to grow in the first place.