Why Your Swim Spa Cover Stinks!

Hey, no offense, however your Swim Spa Cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at some time or another; water is one of nature’s most erosive substances. Moisture leaks in and becomes trapped in between the outer vinyl shell and the cling wrap foam cores. The warm, damp environment is perfect for mold and mildew and other types of smelly stuff.
If wetness has actually permeated further into the plastic wrapped foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and smelly slime, but likewise make the cover really challenging to get rid of, and not as effective at keeping the heat in the spa. Time for a better type of Swim Spa Cover

Foul-smelling Swim Spa Cover?!?
• Broken or harmed. Broken foam cores, ripped or worn areas, torn seams. A Swim Spa Cover that loses it’s arched roofing line, to keep water draining off properly, will eventually begin to puddle water, which is probably time to buy a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is likewise problem, and although you can fend off the unavoidable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can withstand longer durations, however it’s a good practice to remove the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow moisture to get away do so, however don’t remove fragile foam panels unless definitely essential.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a Swim Spa Cover with tape and staples, however it won’t stop moisture effectively. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded joint are not going to keep the intense moisture from your spa from reaching the foam core. The only genuine solution is a Swim Spa Cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained regularly with sanitizer and filtering, or is not surprised frequently enough, germs and algae can make the most of a congenial environment to grow. Low pH, high chlorine or high ozone levels can also degrade the underside of your Swim Spa Cover cover. Since the cover is so close to the spa, it soaks up the chemistry of the spa. Tidy, clear and sanitary water is the very best environment to prevent stinky spa covers. (Sorry but this is simply BS) The reality is the spaces in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be even worse than no roofing at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times each year, so that it constantly looks great, and is safeguarded from the aspects. Again, this really isn’t really going to stop the mold and mildew from growing inside a foam cover However it will help your spa dealer pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Fix Your Swim Spa Cover!
• Remove to Safe Location: This primary step may seem obvious, however you need an excellent location to enable the cover to sit undisturbed from pets, wild animals, and winds. It needs to be a sunny place if possible, or a dry indoor place with low humidity can also be used.
• Deodorize & Disinfect: You might not have to do both, it’s best to be as gentle as possible. Do not use home cleaning products on your Swim Spa Cover, strange chemicals can end up in your spa water. Carefully clean all outside surface areas with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this need to be avoided if possible, due to the fact that the panels might become damaged during elimination or cleansing. But if you determine that there is something slimy within, you can usually unzip and get rid of the panel for a cleaning inside and out.

How often does your spa dealership anticipate you to do all this? If your swim spa is secured from a lot of sun and rain, twice each year. If it’s visible it should be 3-4 times per year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The easiest treatment for a stinky Swim Spa Cover is to just purchase a different kind of Swim Spa Cover A smelly swim spa cover just means that your cover is taking on wetness, and things are starting to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam however has actually sealed air chambers instead will prevent giving the mold and mildew a location to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *